What are the maintenance methods for horizontal flow pack machine?

May 27, 2020

The maintenance methods of horizontal flow pack machine are more important, so only the maintenance can extend the service life of the equipment and ensure the quality of the product. If there is no maintenance, there will be many failure problems during the operation. Doing good maintenance can not only extend the service life of the equipment, but also reduce the occurrence of failures. Then let's understand how the packaging machine is maintained. How about

1. Before starting the horizontal flow pack machin, check whether the components of the automatic packaging machine are intact, whether the screws and nuts of each component are loose, and if they are, they should be tightened in time. The repair personnel should deal with it in time.
horizontal flow pack machin
2. Check whether there is any abnormal blockage in the part of the unloading screw. If there is any blockage, it needs to be removed. Use compressed air to blow out the dust or clean water in the rail.

3. Check the horizontal flow pack machin cutter set. If it is not sharp, please replace it in time. At the same time, it is necessary to add oil to the cutter transmission part by dipping method. Dip the oil with a small stick and slowly drip on it. It cannot be poured into the conveyor belt rail by the inverted method, otherwise the packing belt will slip.

4. If abnormal phenomena are found during the startup process. For example, if the sound is loud, the vibration is strong, or there is an odor, etc., you should stop the machine and notify the repair personnel to deal with it to avoid damage to the parts.

5. After the automatic packaging machine is used for a long time, the operator should lubricate the various components of the packaging machine to ensure that the components can work normally.

6. When repairing the fully automatic packaging machine, the workshop personnel must record the fault of the machine every time to facilitate future inquiries.