product
Cover artwork shows a SUK promotional configuration with illustrative packaging samples, not a completed customer production case. Speeds shown are configuration references; actual output depends on the material, pack dimensions and agreed configuration, and is confirmed through sample trials.
Laundry detergent powder usually leaves a factory in one of two pack forms, and the form decides the machine route. In a roll-film vertical configuration the bag is formed from film on the machine itself, then filled and sealed in the same cycle. In a premade-pouch configuration the pouch arrives already made and is opened, filled and sealed on the machine. Everything else on this page follows from that one difference.
Work through the two configurations below and pick the one that matches the pack you sell. If the pack is a bag formed from a roll of film, the roll-film vertical configuration applies. If the pack is a pouch supplied ready-made, the premade-pouch configuration applies. Where both packs are sold, list both at the start, because the configuration has to cope with the full set rather than with the easiest one.
AI-generated illustrative comparison of generic roll-film bags and premade pouches; not a machine image or customer packaging.
The same detergent powder can behave differently from one pack to the next, so it is worth comparing platforms before the format is fixed. The existing powder packing machine range is a reasonable starting point for that comparison.
In the roll-film vertical configuration the bag is formed on the machine from a roll of film, then filled and sealed in the same cycle. The pack shape, the film structure and the way the powder is dosed all belong to that one integrated sequence, which is why the bag format has to be settled before the machine is discussed.
SUK’s 2026 catalog lists washing powder among the samples for its powder vertical category. The final machine model, the bag dimensions, the dose and the powder-handling configuration all need project confirmation, and none of them is asserted here. The catalog does not state the bag shape or the fill weight for this application either.
Real SUK equipment photo shown as a configuration reference; not a customer laundry-detergent project.
The practical points to review are how the powder leaves the hopper without compacting, how much fine dust appears around the filling and sealing area, and how the seal closes once a detergent film has settled on it. Those are confirmation points for a project review rather than published figures.
Real SUK equipment photo shown as a configuration reference; not a customer laundry-detergent project.
In the premade-pouch configuration the pouch is supplied already made and is opened, filled and sealed on the machine. The pouch is bought finished, so the printed design, the lamination and any zipper or shaped bottom are fixed before the pouch reaches the line.
SUK’s 2026 catalog lists washing powder among the samples for its powder premade-bag category. Which pouch type, which pouch dimensions and which fill weight apply to a detergent pack still have to be fixed in a project review. The powder premade bag packing machine platform is the one to look at when the pouch is bought in rather than formed on the line.
Real SUK equipment photo shown as a configuration reference; not a customer laundry-detergent project.
The filled pouch visible in the photo is a sample from another powder application. It is not a laundry-detergent pouch, and no claim is made here about pouch material or pouch structure for a detergent pack.
Real SUK equipment running photo shown as a premade-pouch configuration reference. The visible pouches belong to another powder application, not a laundry-detergent project.
The machine above is shown in its premade-pouch running configuration only. The pouch format it is feeding is a single example of that configuration, and the pouch type, dimensions and fill weight for a detergent pack still have to be confirmed in a project review.
A stand-up pouch is a made pouch with a shaped bottom, so it sits on the premade side of the choice. Catalog evidence places stand-up pouches with premade-bag equipment; do not plan a stand-up pouch as a vertical roll-film or stick-pack route.
Flat, zipper and stand-up styles are named in the catalog against the premade-bag series as a series reference only. No claim is made here about a specific detergent pouch, pouch dimensions or fill weight, and no specific machine model is named for this application. Premade-pouch configuration required; confirm the actual machine and pouch in a project review.
SUK’s 2026 catalog lists washing powder among the samples for its powder vertical and powder premade-bag categories. The final machine model, the bag dimensions, the dose and the powder-handling configuration need project confirmation.
To move from route to configuration, send the detergent powder you will actually run, a finished bag or pouch, and the pack sizes you sell. A sample of the powder is what allows the feeding and dosing side to be checked against the real material rather than against a description.
Checkweighing, metal detection, cartoning and case packing each add a transfer point, and every transfer point is somewhere powder can escape or a pack can be handled badly, so the line around the machine belongs on the same list.
Send those details through the contact page and we will come back with the configuration that fits the project and the points that still need confirmation.
A laundry detergent powder packaging machine enquiry starts with the retail pack: a small sachet formed from roll film, its target net weight, and the space needed for filling and sealing. This differs from filling larger premade bags, where bag opening, handling and closure require a separate equipment assessment. Share a finished sachet sample so SUK can review the filling path and pack geometry together.
Describe the detergent formulation, particle size distribution, bulk density and tendency to produce dust. Identify ingredients that may affect contact surfaces, seals or cleaning procedures, and provide relevant material compatibility information. The proposal should address powder delivery into a narrow opening and the risk of residue reaching the sealing area. A suitable filling configuration depends on trials with the actual detergent.
Send the target fill weight, finished sachet width and length, proposed film structure, roll details and expected output of accepted packs. Also specify fragrance changes, cleaning access, dust collection needs and available utilities. Ask which contact parts and changeover components are included, and which require separate evaluation.
Use the detergent powder selection guide to prepare sample testing. If sachets will be grouped into retail cartons, review the multi-column cartoning solution with your sachet count and carton sample. Contact SUK to request a proposal based on your powder and packaging samples.
